Ratner Athletics Center

5530 S Ellis Ave, Chicago IL, 60637 Find on Google Maps

Chicago Building ID: 252037

Building Info

Square Footage: 168,984 sqft
#3 Largest of Fitness Center/Health Club/Gyms
Higher than 58% of all buildings
1.2x median
139,707 sqft
1.2x median Fitness Center/Health Club/Gym
138,750.5 sqft
Built: 2003
Primary Property Type: Fitness Center/Health Club/Gym
Community Area: Hyde Park
Chicago Energy Rating: 1.0 / 4
Owner

Emissions & Energy Information for 2022

Greenhouse Gas Intensity: 18.9 kg CO₂e / sqft
#2 Highest of Fitness Center/Health Club/Gyms 🚨
Higher than 97% of all buildings
3.0x median
6.4 kg CO₂e / sqft
1.3x median Fitness Center/Health Club/Gym
15.1 kg CO₂e / sqft
Total Greenhouse Gas Emissions: 3,185.5 metric tons CO₂ eq.
#3 Highest of Fitness Center/Health Club/Gyms 🚨
Higher than 88% of all buildings
3.6x median
885.8 metric tons CO₂ eq.
1.8x median Fitness Center/Health Club/Gym
1,745.8 metric tons CO₂ eq.
Source Energy Usage Intensity: 366.1 kBtu / sqft
#3 Highest of Fitness Center/Health Club/Gyms 🚨
Higher than 97% of all buildings
2.8x median
132.2 kBtu / sqft
1.2x median Fitness Center/Health Club/Gym
313 kBtu / sqft
Site Energy Usage Intensity: 229.8 kBtu / sqft
#1 Highest of Fitness Center/Health Club/Gyms 🚨
Higher than 97% of all buildings
2.9x median
78.4 kBtu / sqft
1.3x median Fitness Center/Health Club/Gym
173.5 kBtu / sqft
Natural Gas Use: 0 kBtu
#1 Lowest of Fitness Center/Health Club/Gyms 🏆
Lower than 97% of all buildings
Median Chicago Building
5,818,399.6 kBtu
Median Fitness Center/Health Club/Gym
9,678,788.8 kBtu
This Building Uses District Heating ❗
Although this building didn't burn any natural gas on site, it's connected to a district heating system, a centralized system for heating multiple buildings. District heating systems can be fully electric, but in Chicago most district heating systems are natural gas powered, meaning this building was most likely still heated with natural gas.
Electricity Use: 10,782,877.8 kBtu
Est. Electric Bill: $452,000 for 2022**
Higher than 81% of all buildings
2.8x median
3,796,376.7 kBtu
1.1x median Fitness Center/Health Club/Gym
9,518,778.8 kBtu
District Steam Use: 20,936,408 kBtu
Most buildings don't use district steam, so we don't currently have comparison data.
District Chilled Water Use: 7,118,315.9 kBtu
Most buildings don't use district chilling, so we don't currently have comparison data.

Historical Data

Year	Floor Area sqft	Chicago Energy Rating	GHG Intensity kg CO₂e / sqft	GHG Emissions metric tons CO₂e	Source EUI kBtu / sqft	Electricity Use kBtu	Natural Gas Use kBtu	District Steam Use kBtu
2015	168,984	-	26.1	4,403	438.9	11,915,963	-	23,793,673
2016	168,984	-	23.2	3,916.4	409.5	10,994,279	-	20,822,452
2017	168,984	-	21.8	3,688.1	384.6	10,280,881	-	21,051,414
2018	168,984	1.0	23.4	3,955.6	406.9	11,805,117	-	23,380,191
2019	168,984	1.0	25.1	4,248.1	450.6	13,891,159	-	23,485,813
2020	168,984	2.0	18.4	3,108.7	330.5	10,232,983	-	19,428,075
2021	168,984	2.0	18.2	3,083.4	343.2	10,960,531	0	19,336,257
2022	168,984	1.0	18.9	3,185.5	366.1	10,782,877	0	20,936,408

* Note on Rankings: Rankings and medians are among included buildings, which are those who reported under the Chicago Energy Benchmarking Ordinance for the year 2022, which only applies to buildings over 50,000 square feet.

** Note on Bill Estimates: Estimates for gas and electric bills are based on average electric and gas retail prices for Chicago in 2021 and are rounded. We expect large buildings would negotiate lower rates with utilities, but these estimates serve as an upper bound of cost and help understand the volume of energy a building is used by comparing it to your own energy bills! See our Chicago Gas & Electric Costs Source for the original statistics.

Data Source: Chicago Energy Benchmarking Data

What Should We Do About This?

Practically every building has room to improve with energy efficiency upgrades like insulation, switching to ENERGY STAR rated appliances, and more, but for any buildings with large natural gas use, we recommend one thing: electrify!

In other words, buildings should look to move all on-site uses of fossil fuels (including space heating, water heating, and cooking) to electrically powered systems like industrial grade heat pumps, heat pump water heaters, and induction stoves. With Illinois' current electric supply, just using the same amount of energy from electricity, rather than natural gas (aka methane) will dramatically reduce greenhouse gas emissions. This is because Illinois' grid in 2020 was already 67% carbon-free (see Illinois - Power | DecarbMyState ). This has already been done across the country with a variety of buildings, large and small, like the Hotel Marcel .

You can help make this a reality by talking to building owners and letting them know that a building's emissions are important to you, and that you want to see their building become fully electric and stop emitting greenhouse gases. Particularly for buildings you have a financial stake in (like your university, work, condo building, or apartment building) your voice in concert with your fellow building users can have a huge impact.

Additional Resources

See some additional resources on improving energy efficiency and understanding this data: